welded steel pipe
"
Tubos sin soldadura ASTM B674, STM B619 del acero de aleación de los ambientes des alta temperatura
Alloy Steel Pipe Hastelloy C-4 Hastelloy C-4 Application: Hastelloy C-4 has been widely used in most of the chemical industry and high-temperature environments. Typical fields of application: ● flue gas desulfurization system ● pickling and acid regeneration plant ● production of acetic acid and agrochemicals ● production of titanium dioxide (chloride method) ● electrolytic plating The corrosion resistance of Hastelloy C-4: Higher molybdenum and chromium content make
Precipitación estupenda de la tubería de acero de la aleación que endurece la aleación 41 para los elementos del motor
Super Alloy Steel Pipe Precipitation Hardening Alloy 41 For Engine Components Alloy Steel Pipe Alloy 41 precipitation hardening Nickel-Base Superalloy Alloy41 is a precipitation hardening Nickel-Base Superalloy, and it has higher tensile and lasting creep strength and good oxidation resistance within the temperature range of 650~950℃. Since the alloy of aluminum, titanium, molybdenum content is high, the ingot blooming is more difficult, but the material after deformation has
Níquel - tubería de acero baja Incoloy A de la superaleación - tubería del acero de aleación del ³ de 286 7,94 G/del cm
Alloy Steel Pipe Incoloy A-286 Charactistic of material: Chemical composition: C: ≤0.08 Cr:13.5-16.0 Ni:24.0-27.0 Mo:1.00-1.50 Ti:1.75-2.30 Fe:remaind V:0.10-0.50 B:0.001-0.010 Mn:1.00-2.00 Al ≤0.04 Si:≤1.00 P:≤0.030 S:≤0.020 Fe-25Ni-15Cr base superalloy + molybdenum,titanium,aluminum,Vanadium Physical properties: Density 7.94 g/cm³ 0.287 lb/in³ Melting Point 1430°C 2600°F Coefficient of Expansion 16.4 μm/m °C (20 - 100°C) 9.1 x 10-6 in/in °F (70 - 212°F) Modulus of Rigidity
GB/T 24187 Tubo de acero soldado de precisión tirado en frío
GB/T 24187 Cold Drawn Precision Steel Tube Single Welded Polish Finish Stainless Steel Cooling Coil/Condenser Coil Pipe Seamless tube heat exchanger stainless steel coil pipe Product Name GB/T 24187 Cold-drawn precision single welded steel tubes coil tube Material Carbon steel Technique Cold Drawn Size O.D 3.18-18mm ; W.T: 0.3-1.3mm Standard GB/T 24187 Grade Q235 Q195 Surface Pickling, annealing, polishing, bright. Test Content analyzing; Metallographic test; Mechanical
Tubería de acero estructural engrasada mecánica de la superficie ERW Q275
Torich Square Pipe Bend Steel Pipe ERW Tube Application:Suitable for mechanical, construction and other structural purposes, and the straight seam welded steel pipe with an outer diameter of not more than 711mm, can also be applied to general welded steel pipe for fluid transportation size:L--4~12m OD--5~711mm WT--0.5~5.5mm Grade:10,20,Q195,Q215,Q213,Q275 Manufacture method:The steel pipe shall be made of hot rolled steel strip or cold rolled steel strip by high frequency
Tubería de acero galvanizada longitudinal de la aleación de GB/T 13793 46m m
TORICH GB/T 13793 Longitudinal High Strength Galvanized Steel Tube 46mm Application Suitable for mechanical, construction and other structural purposes, and the straight seam welded steel pipe with an outer diameter of not more than 711mm, can also be applied to general welded steel pipe for fluid transportation size L--4~12m OD--5~711mm WT--0.5~5.5mm Grade 10,20,Q195,Q215,Q213,Q275 Manufacture method The steel pipe shall be made of hot rolled steel strip or cold rolled steel
La entrega líquida pulida GB/T12771 soldó con autógena las tuberías de acero inoxidables 12Cr18Ni9
GB/T12771 Polished Liquid Delivery Welded Stainless Steel Pipes 12Cr18Ni9 Application: Corrosion resistant stainless steel welded steel pipe for liquid delivery. Size: OD:50-1000mm WT:0.25-50mm Length:3-9m Production Method of Steel: Electric arc furnace and refining outside the furnace Delivery State: Hot treatment and pickling. Surface Quality: Inside and outside surface is smooth.There is no delamination,crack,folding,double skin,twisted,pickling,residual scale or other
El EN de alta calidad 10241 de las BS galvanizó la tubería de acero del carbono usada en el transporte
High Quality BS EN 10241 Galvanized Carbon Steel Pipe used in Transportation The pipe of the EN10241shall have a smooth surface consistent with the manufacturing process and be free from burrs; surface marks may be ground. Unless otherwise specified in the table below. Repairs by weldiing, other than the weld seam, are forbidden.Welded or seamless steel tubes, forging and rolled bars. It is applicable to those threaded steel pipe fittings that are used in the transportation
Dirigir la tubería rectangular especial del acero de carbono de la tubería de acero con GB/T 19001-2008
Special Steel Pipe , Steel Rectangle Tubing for Construction application Standard: ASTM A500 Steel Rectangle Tubing Cold-Formed Welded Carbon Structural Tubing in Rounds and Shapes Rectagnle and Square Applications: for construction of bridges, and buildings, and for general strcutrual purposes For Algricultrual Michinery, Engineering etc. Size range: Square tubes O.D. :20-20 to 500-500mm W.T.:1-24mm L:max12000mm Rectangle tubes O.D. :20-30 to 400-600mm W.T.:1-24mm L
