alloy steel seamless pipe
"
Tubería certificada ISO9001 del extractor de N06625 Inconel 625
Inconel 625 Tubes Sans Soudure for Heat Exchanger Nickel and Nickel alloy referred to the alloy’s main elemental contents of Ni, Cu, Cr, Fe and Mo. Those all characterized by its combination performance of high corrosion resistance and heat ability at temperature 650 ~ 1000 °C. According to main alloy elements content can divide: Ni –Cr – Mo alloy (Inconel 600 Series) Ni-Cr-Fe alloy (Incoloy 800 Series) Ni - Mo – Ni – Cu – (Hastelloy Series) Pure Nickel and low alloy nickel
Bajos tubos soldados con autógena inconsútiles del acero de carbono de la temperatura ASTM A334 Gr.1 Gr.6
Low Temperature ASTM A334 Gr.1 Gr.6 Seamless Welded Carbon Steel Tubes Product Description This specification covers several grades of minimum-wall-thickness, seamless and welded, carbon and alloy-steel tubes intended for use at low temperatures. Some product sizes may not be available under this specification because heavier wall thickness has an adverse affect on low-temperature impact properties. Standard ASTM A334 O.D. 3.2 - 500 mm W.T. 0.5 - 30 mm Length Max 12000 mm
Tubo de acero inconsútil retirado a frío del carbono 10.5m m de JIS G3452
JIS G 3452 Carbon steel pipes for ordinary piping JIS G3452 Carbon Steel Pipes for Ordinary Piping specifies the carbon steel pipe, hereinafter referred to as the "pipes", used for the pipings for conveying steam, water, oil, gas, air, etc. at comparatively low working pressure. CHEMICAL COMPOSITION unit (%) Steel grade P S SGP 0.040max 0.040max Note: Special steel grade is also available, according to customer request. MECHANICAL PROPERTIES Steel grade Tensile strength Mpa
Tubo de acero soldado con autógena longitud de la ronda ERW 12000m m
4.76*0.7 Copper Coating Single Welded Steel Tube 1. Standard ASTM A254 Copper-brazed steel tubing SAE J526 Welded low-carbon tubing EN10305-6 Welded cold drawn tubes from hydraulic and pneumatic power systems 2. Steel Grade BHG1, SPCC, SPCD, SPCEN, ST14, ST15, ST16, DC04, DC05, DC06 3. Heat Treatment BK or NBK 4. Specification O D/ mm 4 4.2 4.76 6 6.35 7.8 8 9.52 W T 0.5-1.0mm (0.5-0.7mm common WT) Tolerance ±0.05mm Length 180Kg/coil; 700-1000m/coil; per customer’s request 5.
El cobre cubrió el tubo aletado bajo inconsútil de 8m m Od
Copper Coated Seamless Low Finned Tube PRODUCT DESCRIPTION: Keyword: Copper Low Fin Tube Material: C10200, C11000 Etc Fin Thickness: 0.1mm - 2mm Tube OD: 8mm - 55mm Length: max 12m Application: For Boiler And Heat Exchanger End Protector: Plain End / Beveled End Surface: Copper Coated Test and Inspection: Tension Test, Flaring Test, Flange Test, Reverse Test, Hardness Test, Hydrostatic or Nondestructive Electric Test etc QUALITY CONTROL: Incoming Raw Material Inspection Raw
ASTM A254 TORICH 10m m Od soldó con autógena el tubo de acero
4.76*0.65 Copper Coating Single Welded Steel Tube 1. Standard ASTM A254 Copper-brazed steel tubing SAE J526 Welded low-carbon tubing EN10305-6 Welded cold drawn tubes from hydraulic and pneumatic power systems 2. Steel Grade BHG1, SPCC, SPCD, SPCEN, ST14, ST15, ST16, DC04, DC05, DC06 3. Heat Treatment BK or NBK 4. Specification O D/ mm 4 4.2 4.76 6 6.35 7.8 8 9.52 W T 0.5-1.0mm (0.5-0.7mm common WT) Tolerance ±0.05mm Length 180Kg/coil; 700-1000m/coil; per customer’s request 5
La capa los 0.4μM Single 4.76x0.65 del cobre soldó con autógena el tubo de acero
4.76*0.65 Copper Coating 0.4μm Single Welded Steel Tube 1. Standard ASTM A254 Copper-brazed steel tubing SAE J526 Welded low-carbon tubing EN10305-6 Welded cold drawn tubes from hydraulic and pneumatic power systems 2. Steel Grade BHG1, SPCC, SPCD, SPCEN, ST14, ST15, ST16, DC04, DC05, DC06 3. Heat Treatment BK or NBK 4. Specification O D/ mm 4 4.2 4.76 6 6.35 7.8 8 9.52 W T 0.5-1.0mm (0.5-0.7mm common WT) Tolerance ±0.05mm Length 180Kg/coil; 700-1000m/coil; per customer’s
Tubo de acero del hex. A500 del rectángulo de la precisión oval del hueco inconsútil
Verified Square Hollow, Rectangle Hollow, Oval,Hex,Omega,Double Fins Precise And Long Special Seamless Shaped Pipe Product name: Special seamless shaped pipe Package: as per customer‘s requests Production tech: Cold drawn Size: as per customer's requests. Special Shape Tube for such diverse applications as: Automotive shafts and steering columns Tools and tool handles Torque wrenches and wrench extensions Telescoping components Rebar and direct drilling couplers Components
304 316 tubos rectangulares de 304L 316L 430/cuadrados de acero inoxidables ASTM A213
ASTM A213 is a standard specification for seamless ferritic and austenitic alloy-steel boiler, superheater, and heat-exchanger tubes. The ASTM A213 Stainless Steel Square Tube is made of stainless steel and comes in a square shape. The tube is commonly used in industrial and domestic applications due to its corrosion-resistant properties. Material and Specification The ASTM A213 Stainless Steel Square Tube is made of stainless steel and comes in a range of sizes. The tube is
